A greenhouse doesn't have to be bucketloadsof cash.
We're gonna make a simple one that you canmove around, and it's gonna have plenty of room in it for all your plants.
We're gonna take your garden area from this.
The good thing about a greenhouse is it cankeep you gardening all year around.
I'm gonna show you how to make a real easyone today.
These are all the tools and equipment thatwe're gonna need to build our greenhouse.
Just a few frames, a little bit of plastic.
If you're a keen gardener, you're gonna wantone of these.
I've got all of my timber pre-cut at Bunnings,and I've sectioned off and labeled all of my different components to make the buildeasy.
To make the base, get the hardwood sleepers,pre-drill and screw together with bugle screws.
To make the base for the floor, we are nowgonna add our timber, down to the bottom, leaving it flush on the floor.
That way you're gonna get a nice clean fit.
Once you have your framing, you can add joistsfor extra support.
This is going to provide the base for theflooring.
Now we have our sub-floor installed.
It's now time to flip it over and put on thecasters.
Use bugle screws.
There's no need to pre-drill, but make sureyou put the wheels with the stoppers on opposing corners.
To lay your floor, put your timber in ribside down, and layer that thirty-odd spacing to still allow for draining.
To make your frame, make the outer frame first,using the framing gun.
I know how big I want my door, so now I justhave to measure and put in my stud work.
Make sure you put in the second brace to allowfor the hinges.
So, that's our front frame made.
Now, let's go and make the door.
Make sure your noggins are flush to the frontof the door to attach your hinges.
To build this side, make a frame and put astud in the middle.
Repeat the process for the other two frames.
Once you've built your framework, it's timeto put the plastic on.
Wrap your frames in plastic, and fix it off.
Make sure you're wearing gloves, and makesure you attach the plastic to the inside of the frame so it looks nice from the outside.
So now we have all of our sides and our frontwrapped.
It's now time to attach the hinges.
Screw the hinges down to the side joists,and attach your pad bolt to the front.
Now the frame's almost finished.
Attach the frame to the base using bugle screws.
It's a little bit tricky, so you might needan extra pair of hands.
To affix the battens to your roof, arrangethem in descending sizes, so you get run-off on the back.
Transfer your measurements from your greenhouseonto some polycarbonate roofing, mark that with a bit of masking tape, and cut to size.
I'm using a metal blade on a medium settingon a jigsaw to allow for a clean cut.
I have measured mine out with a little bitof overhang at the front and at the back to allow rain to fall off.
The last thing we have to do is to attachour roof to our greenhouse.
We're gonna use some roofing screws to dothat.
Attach your screws into the crest of the corrogate.
You only need to do this every second one.
So, there you have it.
A fantastic little greenhouse.
Let's go and find a place for it in the backyard.
So, we have created our own nice, warm environmentfor all of our plants, turning your garden from this.
Singers: Bunnings Warehouse.